Loading component...
Loading component...
Loading component...
Loading component...
Brazil has announced a consolidated Technical Regulation for the mandatory requirements for jewelry. This became effective on April 1, 2021
Brazil has announced a consolidated Technical Regulation for the mandatory requirements for jewelry. This became effective on April 1, 2021
In 2016, Brazil published INMETRO Ordinance 43/2016 to regulate lead and cadmium in jewelry.
In March 2021, the Brazilian Ministry of Economy/National Institute of Metrology, Quality and Technology (Ministério da Economia/Instituto Nacional de Metrologia, Qualidade e Tecnologia) published INMETRO Ordinance No. 123 of February 16, 2021 (Portaria Inmetro No. 123, de 16 de Fevereiro de 2021) as the approved consolidated Technical Regulation for Jewelry and costume jewelry (Consolidated Technical Regulation).
The consolidated Technical Regulation contains, inter alia, several important provisions. It:
The consolidated Technical Regulation became effective on April 1, 2021 and repealed INMETRO Ordinance 43/2016.
Highlights of the requirements for lead and cadmium content are summarized in Table 1.
| Ministry of Economy/National Institute of Metrology, Quality and Technology INMETRO Ordinance No. 123 of February 16, 2021, Consolidated Technical Regulation for Jewelry and Costume Jewelry | |||
|---|---|---|---|
| Substance | Scope | Requirement | Effective Date |
| Lead | Jewelry/Costume Jewelry | < 0.03% (300 ppm) | April 1, 2021 |
| Cadmium | < 0.01% (100 ppm) | ||
Table 1
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. In the end, it’s only trusted because it’s tested.
For enquiries, please contact:
Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420
© SGS Group Management SA - 2021 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.
