The Saudi Standards, Metrology and Quality Organization (SASO) published the Technical Regulation for Restriction of Hazardous Substances in Electrical and Electronic Equipment (SASO RoHS) which was scheduled to take effect on January 5, 2022. Now, implementation will be carried out in stages from July 4, 2022.
The European Union’s Directive 2002/95/EC (superseded by Directive 2011/65/EU) on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) (EU RoHS) has resulted in the globalization of ’RoHS’. Indeed, many countries, such as China, America, Japan, Korea, etc., have successively issued ‘RoHS-like’ regulations. The RoHS requirements in different countries vary, mainly in the categories of regulated EEEs, restricted substances, exemptions, and conformity assessment methods.
On July 9, 2021, the Saudi Standards, Metrology and Quality Organization (SASO) published a Technical Regulation for Restriction of Hazardous Substances in Electrical and Electronic Equipment (SASO RoHS). Six categories of EEE under this regulation must meet relevant requirements before entering the Saudi Market. The restricted substances and limits are summarized in Table 1:
|Hexavalent chromium (Cr(VI))||0.1|
|Polybrominated biphenyls (PBB)||0.1|
|Polybrominated biphenyls ethers (PBDE)||0.1|
The SASO RoHS also requires a conformity assessment. Any supplier responsible for placing electrical and electronic equipment on the Saudi market, must obtain a certificate of conformity issued by a notified body approved by SASO, in accordance with the Conformity Assessment Form (Type 1a) as per ISO/IEC 17067. The product must be accompanied by a technical file that includes supplier (manufacturer/importer) Declaration of Conformity, risk assessment document, the necessary warnings, cautions and manuals for the safe and proper use of the product.
This Technical Regulation was originally scheduled to take effect on January 5, 2022. However, with reference to the meeting of The Conformity Steering Committee No. (17-21)held on December 5, 2021, SASO decided to postpone the implementation of the SASO RoHS for six months, after which the implementation will be carried out in stages. Currently, the product scope and latest enforcement date under SASO RoHS are summarized in Table 2:
Categories of EEE Covered by the Regulation
Mandatory Enforcement Date
|Electrical Home Appliances||Small Electrical Home Appliances||04/07/2022|
|Large Electrical Home Appliances||02/10/2022|
|Information and communication technology equipment||31/12/2022|
|Electrical and electronic tools and equipment||29/06/2023|
|Games, entertainment devices, and sports equipment||27/09/2023|
|Monitoring and control tools.||26/12/2023|
SGS has been accredited with the certification qualification by SASO and can provide enterprises with one-stop services such as product testing, certification and customs clearance certificate. SGS can also help enterprises to ensure product compliance and enter the Saudi market smoothly.
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
For inquiries, please contact:
Technical Supervisor, EET RSTS
t: +(86) 574 8776 7006 ext. 6007
© SGS Group Management SA - 2022 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.