GB/T 43293-2022 Shoe size was released on October 12, 2022 and officially implemented on May 1, 2023.
China Updates Footwear Product Standard – GB/T 43293-2022 Shoe Size
On October 12, 2022, the Administration of Market Supervision and Standardization Administration of the People’s Republic of China (PRC) issued a new shoe size product standard, GB/T 43293-2022, which will become effective on May 1, 2023. GB/T 43293-2022 replaces the previous edition, GB/T 3293.1-1998.
The new standard is applicable to all types of footwear.
Main technical changes
Revisions to GB/T 43293-2022, include:
- Terms and definitions of ‘shoe’, ‘shoe size’ and ‘foot length’
- Definitions and figure of ‘linear width of the foot’
- Fundamental characteristics of the sizing system
- Terms and definitions of ‘joint girth of the foot’, ‘mondopoint’ and ‘Chinese shoe size’
- ‘Format’ of footwear marking
- Transition from other shoe size systems
- Terms and definitions of ‘width of the foot’ and ‘average normal foot’
- Method of determining shoe size
- ‘Identified elements‘ of footwear marking
This document is modified from ISO 9407:2019 – Footwear sizing – Mondopoint system of sizing and marking.
Main technical requirements of GB/T 43293-2022 Shoe size
|1.||Method of expressing shoe sizing||Shoe sizing shall be expressed using the measurement, in millimeters, corresponding to the length of the foot and, if required, to the linear width of the foot, without mention of the measurement units.|
|2.||Footwear marking format||Mondopoint shoe size: shall be preceded by "MP" in upper-case lettering or "Mondo" and shall include the length of the foot followed by, if required, the linear width of the foot with the numbers separated by a dash, an oblique line or brackets. The characters used shall be clearly separated from any other information.|
Example: MP263, MP263/94, MP263-94, Mondo 263(94)
Chinese shoe size: shall include the length of the foot followed by, if required, to the linear width of the foot, or use of codes to express the linear width or joint girth of the foot.
Example: 260, 260/94, 260-94, 260(2.5); 237, 237/82, 237-82, 237(1.5)
|3.||Location of the marking||On the shoe: the size shall be marked on each shoe, on an appropriate part of the shoe where the marking is clearly visible and legible.|
On the packaging: when shoes are to be contained in a box or other form of packaging, the size shall also be given on this packaging
|4.||Form of the marking||The form of the marking and the means by which it is to be applied (by punch, stamp, adhesive label, etc.) can be chosen by the manufacturer provided that the marking remains visible and legible on the shoe for as long as necessary.|
Details of the Technical Content
For more information, please refer to the China Industry Standard FZ/T 81004-2022 Dress and Suit. or contact SGS directly.
China’s GB national standards set requirements for product quality, safety and performance. SGS Global Softlines’ global network, including 10 laboratories in China, offers a wide range of CNAS and CMA accredited services for textiles, apparel, footwear and accessories to help your company demonstrate compliance with Chinese requirements. In the end, it’s only trusted because it’s tested. Contact us for more information or visit our website.
For enquiries, please contact:
Connectivity & Products - Softlines
US & Canada Softlines Business Unit
t: +1 973 461 7919
© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.