Contact

What are you looking for?

Germany’s BfR Updates Food Contact Material Recommendations

SafeGuardSHardgoodsNovember 17, 2026

SG 155/26

German Federal Institute for Risk Assessment (Bundesinstitut für Risikobewertung, BfR) updates several recommendations for a range of food contact materials (FCMs) and articles.

In October 2026, the BfR revised ten recommendations for a variety of FCMs and articles (available in German and English)

What do the recommendations require?

Key changes include:

  • Recommendation XIV (Polymer dispersions):
    • Listing adipic acid dihydrazide and diacetone acrylamide as monomers, and one production aid, subject to substance-specific conditions
      Introducing a migration limit of 0.05 mg/kg for the sum of 2-bromo-2-nitropropane-1,3-diol and 2-bromo-2-nitroethanol
  • Recommendation XV (Silicones):
    • Introducing a migration limit of 0.05 mg/kg for the sum of 2-bromo-2-nitropropane-1,3-diol and 2-bromo-2-nitroethanol
  • Recommendation XXI/3 (Consumer goods made of thermoplastic elastomer vulcanizates (TPV)):
    • Amending language for cross-linking agents by removing ‘based on the thermoplastic content’ under requirements/restrictions
  • Recommendation XXV (Hard paraffins, microcrystalline waxes and mixtures of these with waxes, resins and plastics as well as natural waxes):
    • Adding two antioxidants for copolymer of C5/C6 mono olefins, styrene and cyclic olefins with the composition C10H16
  • Recommendation XXXIII (Acetal resins):
    • Clarifying that the use of trifluoromethane sulfonic acid, a per- and polyfluoroalkyl substance (PFAS), must comply with the requirements in Regulation (EU) 2025/40 on packaging and packaging waste (PPWR)
  • Recommendation XXXVI (Paper and board for food contact):
    • Setting a goal of no detectable migration of genotoxic carcinogens above 0.15 µg/kg of food, while retaining substance-specific detection limits (preamble)
    • Referencing BfR’s migration-testing guideline, updating sizing agents, retention agents, defoamers and slimicides; and removing several PFAS-related surface-treatment entries
    • Requiring cold water extracts of finished products to contain no detectable 1,3-dichloro-2-propanol (detection limit (DL) = 1 µg/L for all articles except 2 µg/L for kitchen paper towels) and no more than 12 µg/L of 3-monochloro-1,2-propanediol migration
    • Introducing a migration limit of 0.05 mg/kg for the sum of 2-bromo-2-nitropropane-1,3-diol and 2-bromo-2-nitroethanol
  • Recommendation XXXVI/1 (Cooking paper, hot filter paper and filter layers):
    • Setting a goal of no detectable migration of genotoxic carcinogens above 0.15 µg/kg of food, while retaining substance-specific detection limits (preamble)
    • Updating the lists of permitted substances for slimicides, preservatives and defoamers
  • Recommendation XXXVI/2 (Paper and paperboard for baking purposes):
    • Setting a goal of no detectable migration of genotoxic carcinogens above 0.15 µg/kg of food, while retaining substance-specific detection limits (preamble)
    • Introducing a migration limit of 0.05 mg/kg for the sum of 2-bromo-2-nitropropane-1,3-diol and 2-bromo-2-nitroethanol
    • Removing several entries related to PFAS for surface treatments
  • Recommendation XXXVI/3 (Absorber pads based on cellulosic fibers for food packaging):
    • Setting a goal of no detectable migration of genotoxic carcinogens above 0.15 µg/kg of food, while retaining substance-specific detection limits (preamble)
    • Introducing a migration limit of 0.05 mg/kg for the sum of 2-bromo-2-nitropropane-1,3-diol and 2-bromo-2-nitroethanol
  • Recommendation LII (Fillers):
    • Clarifying that the use of polytetrafluoroethylene must comply with the applicable PPWR requirements

Who is impacted?

The ten recommendations affect manufacturers, importers, retailers and other economic operators in the supply of the specified FCMs and articles in Germany.

When do they apply?

The amended recommendations apply from October 1, 2026.

We help manufacturers and suppliers of food contact materials (FCM) achieve compliance with markets worldwide while supporting sustainability and market growth through product certification. Our experts offer extensive experience in testing materials and articles for multiple markets, ensuring they meet regulatory and environmental standards. 

We provide comprehensive FCM testing, including migration tests, along with expert guidance on evolving regulations, compliance issues and documentation review. Our expertise ensures your products meet the appropriate territorial regulations for food contact materials and helps pave the way for compliance. Contact us to learn more, or visit our website. In the end, it’s only trusted because it’s tested.

© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.

For enquiries, please contact:

HingWo Tsang

Dr. Hingwo

Tsang

Global Information and Innovation Manager
Connectivity & Products

Stay on top of regulatory changes within your industry

Digital cart concept

News & Insights