Brazil has published an ordinance detailing the consolidated conformity assessment requirements and conformity identification seal for pacifiers. The ordinance entered into force on August 2, 2021.

SAFEGUARDS | Toys & Juvenile ProductsNO. 108/21

 SG 10821 Pacifier

On July 16, 2021, Brazil’s Ministry of Economy/National Institute of Metrology, Quality and Technology (Ministério da Economia/Instituto Nacional de Metrologia, Qualidade e Tecnologia, Inmetro) published Inmetro Ordinance No. 301 of July 12, 2021 (Portaria No. 301, de 12 de Julho de 2021) approving the consolidated conformity assessment requirements for pacifiers (‘the Ordinance’).

The ordinance contains, inter alia, several important provisions. It:

  • Establishes the consolidated legislation for pacifiers in the form of conformity assessment requirements (Annex I) and specifications for the Conformity Identification Seal (Annex II)
  • Requires conformity assessments to be carried out by a Product Certification Body (Organismo de Certificação de Produto, OCP) that is established in Brazil and accredited by Inmetro
  • Requires suppliers to choose Certification Model 1b (batch test) or 5 for conformity assessment requirements – the Certificate of Conformity (CoC) for Model 5 is valid for four years
  • Requires certificates that have been issued to be evaluated against ‘the Ordinance’ in the next evaluation – the requirements related to the validity of the certificate and the timing of maintenance assessments (Annex I to the Ordinance) will apply to certificates already issued by consideration of their issue date 

The Ordinance contains two important dates:

  • August 2, 2021, for date of entry into force
  • December 31, 2021, for pacifier suppliers to adapt the layout of the Conformity Identification Seal (Annex II)

Highlights of adopted complementary documents for the conformity assessment requirements are summarized in Table 1.

Item

Document

Title

1

Inmetro Ordinance No. 200/2021 of April 29, 2021

Approves the Consolidated General Product Certification Requirements (Requisitos Gerais de Certificação de Produtos, RGCP)

2

Law No. 11.256 of 2006

Regulates the sale of food for infants and young children, as well as related childcare products

3

Anvisa Resolution RDC No. 221, 2002

Approves the technical regulation on pacifiers, nipples, baby bottles and nipple protectors

4

Anvisa Resolution RDC No. 81 of 2008

Technical regulation on goods and imported products for sanitary surveillance properties

5

ABNT NBR 5426:1985

Sampling plans and inspection procedures by attributes

6

ABNT NBR 10334:2020

Pacifiers (soothers) safety – Manufacturing requirements

Table 1

SGS offers a range of consulting, training, product development, testing, auditing and inspection services to help you demonstrate that your products are safe, high quality, and that they comply with the strict regulations that are enforced by markets around the world. In the end, it’s only trusted because it’s tested. Contact us for more information or visit our website

For inquiries, please contact:

Dr. Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420

Bruno Grigoleto
Manager
t: (+55) 11 2664 9595 ext. 8060

Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!

Read more articles for the Consumer Goods and Retail industry

© SGS Group Management SA - 2021 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.