Brazil Issues Legislation for Baby Walkers
Brazil has published an ordinance detailing the consolidated technical regulations and conformity assessment requirements for baby walkers. The ordinance became effective on April 1, 2021
SAFEGUARDS | Toys & Juvenile ProductsNO. 048/21
In March 2021, Brazil’s Ministry of Economy/National Institute of Metrology, Quality and Technology (Ministério da Economia/Instituto Nacional de Metrologia, Qualidade e Tecnologia,, Inmetro) published Inmetro Ordinance No. 129 of March 19, 2021 (Portaria No. 129, de 19 de Março de 2021) approving the consolidated technical regulation and conformity assessment requirements for baby walkers (the Ordinance).
The Ordinance contains, inter alia, several important provisions. It:
- Establishes the consolidated regulation for baby walkers in the form of quality technical regulations (Annex I), conformity assessment requirements (Annex II) and specifications for the conformity identification seal (Annex III) – suppliers may choose Certification Model 2, 5 or 1b for conformity assessment requirements
- Specifies that the scope does not include baby walkers for therapeutic and curative purposes
- Requires (certified) baby walkers to be registered with Inmetro
- States that baby walkers falling under the scope of the Ordinance are subject to market surveillance activities by Inmetro and other public enforcement agencies
- Requires suppliers to furnish the required information within 15 days when requested by Inmetro
The Ordinance became effective on April 1, 2021 and repealed Inmetro Ordinance 42/2018 on baby walkers – certificates already issued should be assessed against the new Ordinance in the next evaluation.
Highlights of adopted complementary standards for the conformity assessment requirements are summarized in Table 1.
|Entry||Current Inmetro Standard||Title|
|1||ABNT NBR NM 300-1:2011||Toy Safety – Part 1: General, mechanical and physical properties
|2||ABNT NBR NM 300-2:2004
||Toy Safety – Part 2: Flammability
|3||ABNT NBR NM 300-3:2011
||Toy Safety – Part 3: Migration of certain elements
|4||ABNT NBR 300-6:2004
||Toy Safety – Part 6: Electric toy safety
|5||ABNT NBR 5426:1985
||Sampling plans and procedures for attribute inspection
|6||ABNT NBR 16311:2014||Baby walkers – Safety requirements and test methods|
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. In the end, it’s only trusted because it’s tested. Contact us for more information or visit our website.
For enquiries, please contact:
Global Information and Innovation Manager
t: (+852) 2774 7420
Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!
Read more articles for the Consumer Goods and Retail industry
© SGS Group Management SA - 2021 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.