Contact

What are you looking for?

CPSC Publishes Notice of Proposed Rulemaking (NPR) for a Safety Standard for Crib Mattresses

SafeGuardSToys and Juvenile ProductsNovember 18, 2020

The Consumer Products Safety Commission (CPSC) issues a notice of proposed rulemaking (NPR) under section 104 of the CPSIA to propose a mandatory consumer product safety regulation, 16 CFR 1241, for crib mattresses.

Pursuant to section 104 of the CPSIA, the Commission has proposed to issue a mandatory regulation, 16 CFR 1241, for crib mattresses, incorporating by reference ASTM F2933-19, to further reduce the risk of injury associated with the use of crib mattresses.

Although they are not included in the statutory list of durable infant or toddler products, the Commission proposes to amend part 1130 to include “crib mattresses” within the scope of ASTM F2933 as durable infant or toddler products considering: (1) they are intended for use, and may be reasonably expected to be used, by children under the age of 5 years; (2) they are products similar to the products listed in section 104 of the CPSIA; (3) they are used in conjunction with other durable infant or toddler products used for unattended infant sleep, such as cribs, bassinets, and play yards; and (4) CPSC cannot fully address the risk of injury associated with such infant sleep products without addressing the hazards associated with the use of crib mattresses in these infant sleep products.

Proposed modifications on this Notice of Proposed Rulemaking (NPR) address: 

  1. Suffocation hazards associated with crib mattresses due to overly soft mattresses, by adding a test for mattress firmness
  2. Entrapment hazards associated with full-size crib mattresses due to poor mattress fit from compression by sheets, by repeating the dimensional conformity test and measuring for corner gaps
  3. Entrapment hazards associated with after-market, non-full-size crib mattresses, due to lack of dimensional requirements for rectangular-shaped products, by extending the dimensional requirements in ASTM F2933-19 to all non-full-size crib mattresses
  4. Laceration hazards associated with coils and springs breaking and poking through mattresses, by adding a cyclic impact test for mattresses that use coils and springs; and
  5. The risks of SIDS and suffocation related to infant positioning, soft bedding, and gap entrapment, by improving the labeling and instructional literature requirements to better communicate risks to consumers

Public comments on this NPR may be submitted until January 11, 2021. The effective date will be six months from the date of publication within the Federal Register.

References

[1] Copy of the Standard
[2] Notice of Proposed Rule 16 CFR 1241

SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.

For enquiries, please contact:

Piyush Shah
SGS Consumer and Retail
Technical Director - Hardlines
t: +1 (973) 461-7953


© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.

Stay on top of regulatory changes within your industry
Read more articles for the Consumer Goods and Retail industry
  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152, 1211,

Geneva, Switzerland