Skip to Menu Skip to Search Contact Us Global Websites & Languages Skip to Content
US Flag

You are accessing SGS’s website from the USA.

Visit the US website instead

Stay on the global website and remember my choice

The WTO has circulated a proposal from Vietnam to regulate lead in paint products. It is proposed that the draft technical regulation is adopted in December 2020.

SAFEGUARDS | HardgoodsNO. 155/20

 SG 15520 Paint

On October 6, 2020, the World Trade Organization (WTO) announced a draft technical regulation from Vietnam on its intention to regulate lead content in paints. The draft technical regulation, attached to WTO document 20-6817, contains serval important provisions:

  1. Defining the methods for sampling and lead determination
  2. Reducing the lead content limit from 600 ppm to 90 ppm over a three-year period
  3. Labeling to be carried out in accordance with Decree No 43/2017/ND-CP

According to the definitions in the draft technical regulation, paint is a material in the form of a liquid, a paste or a powder which, after coating a thin layer on the surface of the material, turns into a solid film firmly adhering to that surface, capable of protecting, decorating and having specific properties as required.

Per the WTO document, the draft technical regulation is proposed to be adopted in December 2020 and proposed to enter into force in 2021.

Highlights of the draft technical regulation is summarized in Table 1.

WTO Document Number 20-6817 of October 6, 2020
Vietnam National Technical Regulations on Limiting Lead Content in Paints, QCVN:2020/BCT
Substance Scope Method Requirement Effective Date
Lead Paint products
Sampling:
TCVN 2090:2015 (ISO 15528:2013)

Determination:
CPSC-CH-E100309-01
≤ 600 ppm 
Date this Circular takes effect
≤ 90 ppm 
Within 3 years of the effective date of this Circular

Table 1

SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.

For enquiries, please contact: 

Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420

Huong Nguyen
Technical Manager
t: +84 (0) 28 38 160 999  Ext. 612

Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!

Read more articles for the Consumer Goods and Retail industry

© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.