China’s Standardization Administration Releases Nine VOC Standards
The People’s Republic of China’s Standardization Administration has released nine volatile organic compound (VOC) standards on coatings, adhesives, inks and cleaning agents to win the ‘Blue Sky Campaign’.
SAFEGUARDS | Consumer ProductsNO. 124/20
In 2018, the State Council of the People's Republic of China (PRC) released the ‘three-year action plan to win the battle for a blue sky’ to improve air quality. This proposes the implementation of special volatile organic compound (VOC) remediation plans for the petrochemical, chemical, industrial coating, packaging, printing and other key VOC emitting industries. It also bans the production and use of solvent-based coatings, inks, adhesives and other key industries with a high VOC content. Special enforcement action will be implemented to reduce the total emission of VOCs by more than 10% in 2020 when compared to 2015.
In June, 2020, the Ministry of Ecology and Environment of the PRC (MEE) announced the ‘2020 Volatile Organic Compounds Management Plan’ to reduce emissions by 10%. The plan will vigorously promote source substitution to reduce the emission of VOCs and require manufacturers of coatings, adhesives, inks and cleaning agents to prepare for the implementation of mandatory national standards for VOCs.
To achieve the goal of reducing VOCs, the State Administration for Market Regulation (SAMR) and the Standardization Administration of the PRC (SAC) have successively published nine mandatory national standards. These standards contain methodology and limits for VOCs and other substances in coatings, adhesives, inks and cleaning agents. Coatings, adhesives, inks and cleaning agents are all high-risk VOC-containing materials commonly used in many industries. The publication of these mandatory national standards will facilitate relevant enterprises to reduce the use of VOCs in their products.
Highlights of the nine mandatory national standards are summarized in Table 1.
|standard||Name of the standard||Release Date||Effective Date|
||Limit of harmful substances of interior floor coatings
||Limit of harmful substances of marine coatings
|GB 18581-2020||Limit of harmful substances of woodware coatings
|GB 18582-2020||Limit of harmful substances of architectural wall coatings
|GB 24409-2020||Limit of harmful substances of vehicle coatings
|GB 30981-2020||Limit of harmful substances of industrial protective coatings
|GB 33372-2020||Limit of volatile organic compounds content in adhesive
|GB 38507-2020||Limits of volatile organic compounds (VOCs) in printing ink||2020.03.04
|GB 38508-2020||Limits for volatile organic compounds content in cleaning agents
Note: For details of the standards, please refer to the national standards open system of the PRC.
SGS has test capabilities for relevant VOC standards to help enterprises to comply with mandatory national standards. SGS has been accredited by the China Metrology Accreditation (CMA) for VOCs in mandatory national standards on coatings, adhesives, inks and cleaning agents.
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
For enquiries, please contact:
Technical Supervisor, EET RSTS
t: (86) 574 8776 7006 ext. 6007
Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!
Read more articles for the Consumer Goods and Retail industry
© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.