Colombia extends emergency technical regulation on food contact ceramics to January 16, 2021.
In 2019, the Colombian Ministry of Health and Social Protection (Ministerio de Salud y Protección Social) issued Resolution 1893 of July 16, 2019 (Resolución Número 1893 de 2019 (16 JUL 2019)) to regulate the migration of lead and cadmium from food contact glass, ceramic and similar products (SafeGuardS 5/20). This emergency technical regulation contains provisions relating to, among other things, a list of HS codes for products falling under the scope, migration limits for lead and cadmium, details of conformity assessment, the use of Colombian technical standards (Norma Técnica Colombiana, NTC), or their ISO equivalents, as well as requirements for certificates of conformity (CoCs) issued by a Certification Body. The emergency technical regulation took effect on the date of its publication in the country’s official gazette (Diario Oficial) and was valid until July 16, 2020 (12 months)
On July 15, 2020, the Colombian Ministry of Health and Social Protection issued Resolution 1163 of July 15, 2020 (Resolución Número 1163 de 2020 (15 JUL 2020)) to extend the validity of the emergency technical regulation under Resolution 1893 of July 16, 2019 for a further six months. This Resolution was published in the Diario Oficial on July 17, 2020 and became effective on the date of its publication. It is valid until January 16, 2021.
Highlights of the resolution on the requirements for lead and cadmium migration are summarized in Table 1.
|Colombian Ministry of Health and Social Protection|
Resolutions 1893 of 2019 (July 16, 2020) and 1163 of 2020 (July 16, 2020)
|Ceramics and Porcelain||Flatware (≤ 25 mm internal depth)||≤ 1.7 mg/dm²||≤ 0.17 mg/dm²|
|Articles that can be filled (> 25 mm internal depth)||Small Hollow ware|
|≤ 5.0 mg/L||≤ 0.5 mg/L|
|Large Hollow ware|
(1.1L ≤ capacity < 3L)
|≤ 2.5 mg/L||≤ 0.25 mg/L|
|Cups and mugs and similar articles||≤ 5.0 mg/L||≤ 0.5 mg/L|
|Pitchers (jugs) |
|≤ 2.5 mg/L||≤ 0.25 mg/L|
|Ceramic||Cooking utensils||---||≤ 5.0 mg/L||≤ 0.5 mg/L|
|Glass and glass-ceramics||Flatware (≤ 25 mm internal depth)||≤ 1.7 mg/dm²||≤ 0.17 mg/dm²|
|Articles that can be filled (> 25 mm internal depth)||Small concave utensils||≤ 5.0 mg/L||≤ 0.5 mg/L|
|Large concave utensils||≤ 2.5 mg/L||≤ 0.25 mg/L|
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
For enquiries, please contact:
Global Information and Innovation Manager
Tel: (+852) 2774 7420
Camilo E. Ramírez R
Certification Director - SGS COLOMBIA S.A.S
t: +57 1 606 92 92 Ext. 1419
© SGS Group Management SA - 2019 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.