Contact

What are you looking for?

Revised EU Standard for Electric Toys EN IEC 62115 Published

SafeGuardSToys and Juvenile ProductsMarch 09, 2020

On February 21 CENELEC published EN IEC 62115:2020 and A11:2020. The standard should be soon available for sale with CENELEC standards organizations.

EN IEC 62115:2020 is the European version of the international IEC 62115:2017 electric toy standard. Technically the standards are the same, as the aim is to achieve worldwide harmonization. The publication of a separate European standard was needed in order to comply with some formal requirements of the European Toy Safety Directive 2009/48/EC.

These specific European requirements are included in a separate amendment – EN IEC 62115:2020: A11:2020.

The separate amendment includes:

  • References to other relevant European standards, like the EN 71-series and relevant European directives
  • The relationship between the standard and the essential safety requirements of the EU Toy Safety Directive 2009/48/EC
  • A rationale explaining the requirements of the standard

The standard and amendment were published on February 21, 2020 and should be soon available for sale with CENELEC standards organizations

The standard still needs to be harmonized. This means that it needs to be accepted by the EU Commission and Member States by publication in the Official Journal of the EU (OJEU). Only then it can be used to show compliance to the EU Toy Safety Directive 2009/48/EC. 

In order to allow industry to adapt to new requirements there is normally a transitional period during which the old and the new version of the standard can be used. This transitional period is not yet known but may be expected to be two years.

Although the new standard is technically the same as IEC 62115:2017, there are major changes to the currently harmonized EN 62115:2005/A12:2015.

Major changes between the currently harmonized EN 62115:2005/A12:2015 and the new EN IEC 62115:2020 and amendment A11:2020 include:

  • Changes regarding preconditioning (tests are to be performed with or without preconditioning, whatever is most unfavorable)
  • Button and coin batteries: new requirements and new warnings. Button and coin batteries are likely to be ingested by children. The new requirements should make them less accessible
  • New requirements for the safety of remote controls supplied with electrical ride-on toys
  • New requirements and instructions for electric toys to be connected to class 1 equipment
  • New requirements for supply via USB connection
  • Clarification of humidity and moisture requirements
  • Change of requirements regarding impact resistance for enclosures, the impact energy reduced from 0.7J to 0.5J
  • Assessment of LED is modified using LED technical data sheet

SGS offers a wide range of services to ensure that your products comply with the EU Toy Safety Directive. We offer training, safety/risk assessment, technical documentation check, labeling review, testing according to harmonized standards, SVHC screening, inspections and audits. With the largest global network of toy experts and testing facilities around the world – around 20 toy labs worldwide including three EU Notified Bodies (France, Germany and Netherlands), SGS is the partner to trust. Please do not hesitate to contact us for further information or visit our website.

To know more, join our webinar "FOCUS ON EN IEC 62115:2020 FOR ELECTRIC TOYS".

Register for March 24, 2020
09:00 London
10:00 Paris, Berlin, Madrid, Amsterdam
17:00 Hong Kong

  • Duration/Language: 60 minutes (including Q&A)/English
  • Cost: This webinar is free of charge for attendees

For enquiries, please contact:

Sanda Stefanovic
Toys Expert
t: +318 821 44617 

© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’ prior written consent.

Stay on top of regulatory changes within your industry
Read more articles for the Consumer Goods and Retail industry
  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152, 1211,

Geneva, Switzerland