India has informed the WTO of its intention to regulate toys by requiring these products to comply with the latest version of a list of standards and to bear a Standard Mark. These will enter into force after six months from its publication in the Official Journal.
On February 7, 2020, the World Trade Organization (WTO) circulated a draft Order from India announcing its intention to regulate toys.
The draft Order, called the Toys (Quality Control) Order, 2020 and attached to WTO document number 20-0985, contains several important provisions:
- Requiring toys to conform to the latest version of a list of Indian Standards
- Requiring toys to bear the Standard Mark under a license from the Bureau, as per Scheme-I of Schedule-II of BIS (Conformity Assessment) Regulations, 2018
- Directing the Bureau to be the certifying and enforcement authority
According to the WTO notification, comments for the draft Order were accepted until February 22, 2020. The proposed date of entry into force is six months from the date of publication in the Official Gazette.
Highlights of the list of Indian Standards for toy safety in the draft Order are summarized in Table 1.
WTO Document Number 20-0985, February 7, 2020 Draft Toys (Quality Control) Order, 2020 | ||
---|---|---|
Entry | Indian Standards (IS)* | Title |
1 | IS 9873 (Part 1): 2019 | Mechanical and Physical Properties |
2 | IS 9873 (Part 2): 2017 | Flammability |
3 | IS 9873 (Part 3): 2017 | Migration of Certain Elements |
4 | IS 9873 (Part 4): 2017 | Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use |
5 | IS 9873 (Part 7): 2017 | Finger Paints |
6 | IS 9873 (Part 9): 2017 | Certain Phthalate Esters in Toys and Children’s Products |
7 | IS 15644:2006, reaffirmed year 2016 | Safety of Electric Toys |
*The latest version of IS, including its amendments, as notified by the Bureau from time to time, will apply from the date of notification |
Table 1
In December 2019, India amended its import policy on toys by ‘sending randomly selected toy samples from each consignment to an NABL accredited lab for testing to determine customs clearance’
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420
Ashwani Verma
Operations Manager
Tel: (+91) 9810313721
© SGS Group Management SA - 2020 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’ prior written consent.