Vermont, USA, Proposes to Expand Definition of Formaldehyde in CHCC Reporting Rule
Vermont has recently proposed a revision to its disclosure program for children’s products by expanding the definition of formaldehyde. Comments are accepted until December 11, 2019.
SAFEGUARDS | Consumer ProductsNO. 160/19
In June 2014, the US state of Vermont signed the S.238 bill into law (Act 188 codified as V.S.A. Title 18: Chapter 38A ‘Chemicals of High Concern to Children’) (the ‘Act’) to require a manufacturer of a children’s product or a trade association representing a manufacturer of children’s products to report the presence of chemicals of high concern to children (CHCCs) to the Department of Health (DOH) (SafeGuardS 121/14). That piece of legislation also directs the DOH to publish ‘Rules’ for implementing the Act.
According to the Act, reporting is required if the CHCC is in an accessible component of a children’s product, and is:
- Intentionally added and is greater than the practical quantification limit (PQL), or
- A contaminant that is equal to or greater than 100 ppm
On October 30, 2019, the DOH posted a proposal (Number 19PO74) to expand the definition of formaldehyde to include ‘formaldehyde donors’ – substances that are intentionally added to a product to degrade to and release formaldehyde as a preservative.
According to the proposal, comments are accepted until December 11, 2019
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
For enquiries, please contact:
Global Information and Innovation Manager
Tel:(+852) 2774 7420
© SGS Group Management SA - 2019 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.