US Bean Bag Safety Standard Updated
ASTM International has published an update to the ASTM F1912 Standard Specification for Safety of Bean Bag Chairs and Bean Bag Covers. The standard’s scope now includes bean bag covers sold separately.
SAFEGUARDS | Hardgoods NO. 153/19
In October 2019, ASTM Subcommittee F15.39 published a revision to the ASTM F1912 Standard Specification for Safety of Bean Bag Chairs and Bean Bag Covers. The newly published version, designated ASTM F1912-19, now includes separately sold bean bag covers.
ASTM F1912 was created to address choking and suffocation hazard(s) associated with bean bag chairs. The CPSC reported 5 deaths and 26 injuries from 1973 to 1995.
The specification covers bean bag chairs and bean bag covers with and without zippers, and specifically covers two types:
Those designed to be refilled, and
Those designed with permanent closures and not intended to be refilled.
Defined as, “a bag or cover capable of being filled with polymeric or natural material beads, or a liner that contains polymeric or natural material beads”, bean bag covers are now subject to durability, performance, and labelling requirements.
Also included is a new definition for a “non-refillable bean bag chair”, which is defined as, “a bean bag chair not intended to be refilled with polymeric or natural material beads, or a liner that contains polymeric or natural material beads”.
Per the specification, bean bag chairs and bean bag covers shall:
- Include appropriate suffocation safety labelling, depending on intent to be refilled.
- Withstand a drop durability test without failure of seams or closure mechanisms, allowing unintended access to filling material or inner liner
- Include zippers that are either disabled or require a specified minimum force for actuation.
Safety specifications are expected to evolve over time, addressing new product associated hazards and keeping current with product developments. ASTM F1912’s update to include bean bag chair covers was precipitated by a January 2018 recall of bean bag chair covers that used zippers that could be opened by children.
SGS Furniture Services
SGS adds value from the drawing board to the shop floor. With a full -range of services, including product design analysis, component and product testing, auditing, inspection and retail store checks, SGS helps businesses deliver well-designed, functional, durable and safe products to their customers. They have the furniture industry, regulatory and technical expertise required to check a product’s’ compliance against relevant standards and/or a manufacturer’s own specifications. Learn more about SGS’s Furniture Services.
For enquiries, please contact:
Senior Technical Manager – Hardlines
t: +1 973 461 1505
Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!
Read more articles for the Consumer Goods and Retail industry
© SGS Group Management SA - 2019 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.