Taiwan Releases Updated CNS 15290 Safety Requirements for Textile Products
The Bureau of Standards, Metrology and Inspection (BSMI) of Taiwan revised and published CNS 15290:2018 to establish the general safety requirements for textile and apparel products.
SAFEGUARDS | Softlines NO. 127/19
Textile and apparel products that are imported into, manufactured or sold in Taiwan are required to comply with a mandatory inspection regime based on the requirements outlined in CNS 15290. In August 2018, the Bureau of Standards, Metrology and Inspection (BSMI) of Taiwan published the revised CNS 15290:2018 – Safety of Textiles (General Requirements) after redefining the scope of limitation on some restricted substances.
|Restricted Substances||2013 Version||2018 Version||Description|
|Cadmium||Accessories of textile and apparel products must not contain cadmium.||Accessories products must not contain cadmium.||Redefine the scope of limitation.|
|Lead||The lead content of non-volatile components in surface coating of textiles for children under 12 must not contain more than 90 mg/kg.||The lead content in surface coating of textiles for children under 12 must not contain more than 90 mg/kg.||Redefine the scope of limitation.|
|NPEO and NP||The content of NPEO and NP in textiles for children under 12 must not contain more than 1,000 mg/kg.||The total content of NPEO and NP in textiles must not contain more than 1,000 mg/kg.||Redefine the scope of limitation.
The limit of NPEO and NP is in total content.
The new version of CNS 15290 safety requirements still applies to the following textile products. Products that are excluded from the regulation are geo-textiles, and textile products for protection against insulation, radioactive contamination and heat.
- Textile products for infant
- Textile products with direct skin contact
- Textile products without direct skin contact
- Indoor decorative textile products
The summary of general requirements for textile products under CNS 15290:2018 is as below.
|Requirements||Textile products for infant||Textile products with direct skin contact||Textile products without direct skin contact||Indoor decorative textile products||Test method|
(Comply with CNS 14940)
|< 20 mg/kg||< 75 mg/kg||< 300 mg/kg||< 300 mg/kg||CNS 15580-1|
|Azo Colorants||≤ 30 mg/kg||CNS 15204 / CNS 15205-1 / CNS 15205-2|
|Not Allowed||CNS 4797-2|
|Lead in Surface Coating
(for children age ≤ 12 only)
|≤ 90 mg/kg||CNS 4797-2|
|Physical Safety Requirements||Comply with CNS 15291 Safety of children’s clothing – cords and drawstrings on children’s clothing – specifications||CNS 15291|
|Organotins||TBT||< 0.5 mg/kg||< 1 mg/kg||NIEA T504.30B|
|TPT||< 0.5 mg/kg||< 1 mg/kg|
|NPEO and NP||≤ 1000 mg/kg (sum)||CNS 15579|
The BSMI conducts mandatory monitoring and inspection on textile and apparel products that are imported into, manufactured or sold in Taiwan. All of the import inspection or market surveillance results and recall cases are timely posted on the BSMI product safety information website https://safety.bsmi.gov.tw/.
SGS Global Softlines has an extensive network of over 40 laboratories worldwide, with a strong team of committed professionals from multi-disciplinary backgrounds. Our internationally accredited state-of-the-art testing laboratories offer a comprehensive range of physical, chemical and functional testing services for components, materials and finished products. We help your company ensure quality, performance and compliance with international, industrial and regulatory standards worldwide. Discover more at www.sgs.com/softlines.
For enquiries, please contact:
Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!
Read more articles for the Consumer Goods and Retail industry
© SGS Group Management SA - 2019 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.