US CPSC Issues a Safety Standard for Stationary Activity Centers
On June 18, 2019, the US Consumer Products Safety Commission approved Final Rule 16 CFR 1238, a safety standard for Stationary Activity Centers.
SAFEGUARDS | Toys & Juvenile Products NO. 098/19
On June 18, 2019, the CPSC approved Final Rule 16 CFR 1238, a safety standard for Stationary Activity Centers. The rule adopts ASTM F2012-18e1 (Standard Consumer Safety Performance Specification for Stationary Activity Centers) with no modifications and will become effective on December 18, 2019.
The standard defines stationary activity center as, “a freestanding product intended to remain stationary that enables a sitting or standing occupant whose torso is completely surrounded by the product to walk, rock, play, spin or bounce, or all of these, within a limited range of motion”.
The standard includes the following requirements:
- Hazardous sharp edges or points
- Small parts
- Wood Parts
- Latching or locking mechanisms
- Scissoring, shearing, pinching
- Exposed coil springs
- Protective components
- Spring supported stationary activity center
- CPSIA requirements
- Structural integrity (dynamic and static load)
- Leg openings
- Motion resistance for open base stationary activity centers
- Marking and labeling
- Instructional literature
Copy of the standard can be purchased here.
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.
All stationary activity centers manufactured starting December 18, 2019 must meet the requirements of 16 CFR 1238 and must be 3rd party tested by a CPSC accepted test laboratory.
For enquiries, please contact:
SGS Consumer and Retail
Technical Director (Hardlines)
t: +1 (973) 461-7953
Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!
Read more articles for the Consumer Goods and Retail industry© SGS Group Management SA - 2019 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.