Contact

What are you looking for?

Moldova Regulates Toys to European Standards

SafeGuardSMay 23, 2018

The Republic of Moldova has transposed European legislation on toy safety into its national law. The new Technical Regulation became effective in November 2017.

In February 2018, the World Trade Organization (WTO) circulated a notification relating to Moldova’s Decision Number 808 of October 29, 2015 ‘On Approval of the Technical Regulation on Toy Safety Requirements’. Decision Number 808 of  October 29, 2015 [1] , attached to WTO document number 18-1185 [2] and notified under G/TBT/N/MDA/38, has repealed Decision Number 83 of January 31, 2008 ‘On Approval of the Technical Regulation on Toy Safety Requirements’ [3].

The provisions in the new Technical Regulation are similar to the requirements in Directive 2009/48/EC, the so-called European Toy Safety Directive (TSD). These include, inter alia, the following:

  • Obligations for economic operators (manufacturers, authorized representatives, importers and distributors), including considerations where obligations for manufacturers are applied to importers and distributors
  • Requiring the SM conformity mark or CE conformity mark for compliant toys to be placed on the market. It is prohibited to affix the SM mark (Law Number 235 of December 01, 2011 [4]) and the CE mark to the same toy
  • Applying conformity assessment procedures using harmonized standards that are cited in the Official Journal of the European Union (OJEU) and adopted as Moldovan standards for demonstrating presumption of conformity to cover all safety requirements, or a type examination procedure
  • Providing a list of products that are not considered as toys (Annex 1)
  • Specific requirements for properties relating to physical and mechanical, flammability, chemical, electrical, hygiene and radioactivity (Annex 2)
  • Before placing a toy on the market, manufacturers are obliged to carry out a safety assessment on the analysis of the chemical, physical, mechanical, electrical, flammability, hygiene and radioactivity hazards that the toy may present and an assessment of the potential exposure to such hazards
  • Requiring a declaration of compliance for compliant toys (DoC, Annex 3)
  • Requiring manufacturers to draw up technical documentation containing the information in Annex 4
  • Requiring warnings to be marked in a manner that is clearly visible, easily legible, understandable and accurate on the toy or on an affixed label or on the packaging. Warnings are to be affixed to small toys which are sold without packaging (Annex 5)
  • Requiring authorities to carry out market surveillance activities (Annex 6, amended by Decision Number 1089 of December 18, 2017 [5])

Moldova has adopted TCEP, TCPP, TDCP and bisphenol A (BPA) from Annex 2 of Appendix C to the TSD into its new Technical Regulation. This new piece of legislation may be amended in the future to reflect the other restricted chemicals falling under Annex 2 of Appendix C to the TSD (BIT, CMI, CI, CMI:CI (3:1), formamide [6] and phenol [7]), the strengthened limits for lead migration [8] (Directive (EU) 2017/738), and the permitted use of nickel in toy components which are intended to conduct an electric current [9] (Directive 2014/84/EU).

Apart from a few provisions, Decision Number 808 of October 29, 2015 has been effective since November 2017.  

Definitions

ItemAcronym/AbbreviationChemical
1BIT1,2-Benzisothiazol- 3(2H)-one
2BPABisphenol A
3CMI5-Chloro-2-methylisothiazolin-3(2H)-one
4CMI:MI (3:1)3:1 mixture of CMI and MI
5MI2-Methylisothiazolin-3(2H)-one
6TCEPTris(2-chloroethyl) phosphate
7TCPPTris(2-chloro-1-methylethyl) phosphate
8TDCPTris[2-chloro-1-(chloromethyl)ethyl] phosphate

Next step:

Stakeholders are advised to comply with latest requirements for toys for the Republic of Moldova.

SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Please do not hesitate to contact us for further information.

For enquiries, please contact:

Hingwo Tsang
Global Information and Innovation Manager
t: +852 2774 7420

Teodor Ghiesu & Rodica Chiriliuc
AFL/FOOD&CRS
t: (+373) 22 22 83

Stay on top of regulatory changes within your industry: subscribe to SafeGuardS!

Read more articles for the Consumer Goods and Retail industry

© SGS Group Management SA - 2018 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.

Stay on top of regulatory changes within your industry
Read more articles for the Consumer Goods and Retail industry

News & Insights

  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152, 1211,

Geneva, Switzerland