The US EPA has published a supplemental proposed rule to revise two additional standards for composite wood products under TSCA Title VI. Comments are accepted until October 20, 2022.
In March 2022, the US Environmental Protection Agency (EPA) issued a proposed rule to update the incorporation by reference of seven voluntary consensus standards falling under 40 CFR 770 ‘Formaldehyde Standards for Composite Wood Products’ (Toxic Substances Control Act Title VI (TSCA Title VI, SafeGuardS 44/22).
On September 20, 2022, the EPA published a supplemental notice of proposed rulemaking (SNPRM) in the Federal Register (87 FR 57432) to revise two additional voluntary consensus standards in the formaldehyde standards for composite wood products regulations. These two standards were issued after the consultation period for the aforementioned proposed rule.
The SNPRM also revises the definitions for ‘Medium-density fiberboard’ and ‘Particleboard’ by amending the relevant corresponding standards to their latest versions.
Highlights of updates to the two additional voluntary consensus standards in the SNPRM are summarized in Table 1.
87 FR 57432, September 20, 2022
40 CFR Part 770 ‘Supplemental Notice of Proposed Rulemaking – Voluntary Consensus Standards Update; Formaldehyde Emission Standards for Composite Wood Products
|Entry||Current Standard||Proposed New Standard|
|1||ANSI A208.1-2016||ANSI A208.1-2022 ‘Particleboard’|
|2||ANSI A208.2-2016||ANSI A208.2-2022 ‘Medium Density Fiberboard (MDF) for Interior Applications’|
Comments will be accepted until October 20, 2022.
SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. In the end, it’s only trusted because it’s tested. Contact us for more information or visit our website.
For inquiries, please contact:
Dr. Hingwo Tsang
Global Information and Innovation Manager
t: +852 2774 7420
Ms Melanie Schubert
Senior Technical Manager
t: +1 312 414 9394
© SGS Group Management SA - 2022 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.