Loading component...
Loading component...
Loading component...
Loading component...
The US TPCH has added PFAS and phthalates to its model legislation on packaging. The revised model legislation became effective on February 16, 2021.
The US TPCH has added PFAS and phthalates to its model legislation on packaging. The revised model legislation became effective on February 16, 2021.
In 1992, the Coalition of Northeastern Governors (CONEG) established the Toxics in Packaging Clearinghouse (TPCH) to promote the Model Toxics in Packaging Legislation (Model Legislation), a piece of legislation that restricts the sum of four intentionally introduced heavy metals (lead, cadmium, mercury and chromium (VI)) to no more than 100 parts per million (ppm) in packaging and packaging components. Additionally, the legislation provides certain derogations to these restrictions and requires manufacturers/suppliers to provide a certificate of compliance (CoC) to packaging purchasers, and upon request, to state agencies and members of the public. This legislation has been adopted by 19 states across the United States (US) – California, Connecticut, Florida, Georgia, Illinois, Iowa, Maine, Maryland, Minnesota, Missouri, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont, Virginia, Washington and Wisconsin.
On February 16, 2021, the US TPCH issued an update to its Model Legislation. The revised Model Legislation contains, inter alia, several important changes. It:
The revised Model Legislation became effective on February 16, 2021.
Highlights of the regulated chemicals in the revised Model Legislation are summarized in Table 1.
| Toxics in Packaging Clearinghouse Model Legislation 2021 Update, February 16, 2021 | |||
|---|---|---|---|
| Substance | Scope | Requirement | Effective Date |
| Lead, cadmium, mercury and chromium (VI) | Package or packaging component | ≤ 100 ppm (sum) | February 16, 2021* |
| Phthalates | ≤ 100 ppm (sum) | ||
| PFAS | Prohibited (Not detected) | ||
| *Each state may adopt changes to its existing law or adopt a new law to address toxics in packaging. | |||
Table 1
SGS is committed to providing information abut development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. In the end, it’s only trusted because it’s tested. Contact us for more information or visit our website.
For enquiries, please contact:
Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420
© SGS Group Management SA - 2021 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.
