Contact

What are you looking for?

UK Publishes Designated Standard for Electrically Power Assisted Cycles EN 15194:2017 with Restrictions

SafeGuardSElectrical & ElectronicsMarch 29, 2023

SG 39/23

UK withdraws EN 15194:2017 Electrically Power Assisted Cycles from its list of designated standards that show compliance with S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008”. It will be updated to include two restrictions.

The standard EN 15194 covers safety requirements for electrically power assisted bicycles that have a maximum   continuous rated power of 0.25kW. It looks to cover all significant hazards, hazardous situations and hazardous events when the product is used as intended by the manufacturer or during reasonably foreseeable misuse by the user(s). Electrically power assisted bicycles under the scope of this standard are also required to have power output reduction and cut off at a speed of 25 km/h if the user stops peddling.

The standard has now been re-designated with restrictions in the United Kingdom (UK), highlighting the limitations of the EN 15194 standard when seeking compliance with S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008”.

EN 15194 does not adequately address the hazards posed by electrically power assisted bicycles in two areas and two restrictions have now been published to explain what needs to be addressed to ensure compliance against S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008”:

  • Restriction 1 - Risks associated with Extreme Temperature, referencing points 1.5.5, 1.5.6 and 1.5.7 of schedule 2, Part 1 (Annex I) of S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008”
  • Restriction 2 - Risks resulting from Vibrations, referencing points 1.5.9 and 3.3.6.1 of schedule 2, Part 1 (Annex I) of S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008”

This means that compliance with EN 15194 does not confer a presumption of conformity with S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008”. These two additional safety points will need to be addressed to show compliance to the statuary instrument.

S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008” requires machinery to be designed and constructed in such a way as to account for the potential risks associated with extreme temperature, fire and explosion. This is not adequately addressed in EN 15194 and is what Restriction 1, the risks associated with extreme temperature, refers to.

S.I. 2008/1597 “Health and Safety - The Supply of Machinery (Safety) Regulations 2008” requires machinery to be designed and constructed in such a way as to account for the potential risks associated with vibrations. The machinery must all be provided with the measurement of vibrations transmitted by the machinery to the operator of that machinery. This is not adequately addressed in EN 15194 and is what Restriction 2, the risks resulting from vibrations, refers to.

Our holistic Total Solution Services for electrical &electronic products, delivered through our global network of accredited testing laboratories, ensure manufacturers and retailers have access to expert support at every stage of the product life cycle, from design, production and regulatory compliance to the import and export of goods. Contact us for more information or visit our website. In the end, it’s only trusted because it’s tested.

© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.

Related Services

For further information, please contact:

Chris Walker

Chris Walker

Technical Manager

News & Insights

  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152,

1211, Geneva, Switzerland