Contact

What are you looking for?

Minnesota, USA, Delays Enforcement of Chemicals in Certain Goods

SafeGuardSElectrical & Electronics, HardgoodsSeptember 02, 2024

SG 136/24

Minnesota has delayed the enforcement of restrictions on PFAS, lead and cadmium in four specified products to July 2025.

In 2023, the US state of Minnesota approved HF 2310 (Chapter 60) to regulate PFAS and two heavy metals in a wide range of consumer products.

Among the provisions in this law, it:

  • Prohibited intentionally added per- and polyfluoroalkyl substances (PFAS) in 11 categories of products, including upholstered furniture
  • Restricted lead and cadmium in 15 product categories, including keys and school supplies (SafeGuardS 66/23)

In 2024, Minnesota’s Pollution Control Agency (MPCA) issued two separate guidelines to assist stakeholders with the aforementioned PFAS prohibitions and heavy metal restrictions (SafeGuardS 63/24 and 64/24).

In May 2024, the governor of Minnesota signed HF 3911 (Chapter 116) into law. Section 31 to this environmental and natural resources supplemental budget bill authorizes the commissioner of the MPCA to postpone the enforcement of the 2023 law on the prohibition of PFAS and restriction of lead and cadmium in certain products to July 1, 2025.

Highlights of HF 3911 in relation to the delay enforcement of PFAS, lead and cadmium in the four specified product categories are summarized in Table 1.


ItemScopeRequirementNew effective date
1Pens and mechanical pencils≤ 90 ppm leadJuly 1, 2025
2Internal electronic components of key fobs≤ 90 ppm lead and ≤ 75 ppm cadmiumJuly 1, 2025
3Firefighting foam used in fire suppression systems installed in airport hangersProhibits PFAS if intentionally addedJuly 1, 2025
4Electronic or other internal components of upholstered furnitureProhibits PFAS if intentionally addedJuly 1, 2025

Table 1

HF 3911 also directs the commissioner of the MPCA to submit a report to the state legislature by January 31, 2025, with recommendations on whether extensions should be permitted for the use of PFAS, lead and cadmium as described in section 31 of this law.

SGS is committed to providing information about development in regulations for consumer products as complimentary services. Through a global network of laboratories, SGS provides a wide range of services including physical/mechanical testing, analytical testing and consultancy work for technical and non-technical parameters applicable to a comprehensive range of consumer products. Contact us for more information or visit our website. In the end, it’s only trusted because it’s tested.

© SGS Société Générale de Surveillance SA. This publication or website is a property of SGS Société Générale de Surveillance SA. All contents including website designs, text, and graphics contained herein are owned by or licensed to SGS Société Générale de Surveillance SA. The information provided is for technical and general information purposes only and offers no legal advice. The information is no substitute for professional legal advice to ensure compliance with the applicable laws and regulations. All information is provided in good faith “as is”, and SGS Société Générale de Surveillance SA makes no representation or warranty of any kind, express or implied, and does not warrant that the information will be error-free or meet any particular criteria of performance or quality.

For further information, please contact:

HingWo Tsang

Dr.

Hingwo

Tsang

Global Information and Innovation Manager
Melanie Tamayo

Melanie

Tamayo

Senior Technical Manager, SGS NA

Stay on top of regulatory changes within your industry

Digital cart concept

News & Insights

  • SGS Chile

Puerto Madero #130, Pudahuel,

9020000,

Santiago, Chile