Contact

What are you looking for?

New FSC® Labeling Flexibilities for Small Formats and QR Labels

November 20, 2026

Swing tags, small envelopes and other small-format items often leave little space for a complete Forest Stewardship Council (FSC®) label. To keep every element legible, the label graphics may need adjusting without compromising the design.

In 2026, the FSC published guidance and derogations that permit certain adaptations to its trademark use system. One principle applies throughout: label elements must be legible and trademark use must give clear, accurate information about the certified product.

As an accredited FSC certification body, we outline what has changed and what manufacturers and packaging teams should review.

Smaller labels for limited printable space

Derogation DER-STD-50-001_04 permits the portrait label to be reduced to a minimum width of 5.5 mm, provided all elements remain legible. The flexibility is intended for products with limited printable space, such as swing tags and small items.

The 5.5 mm minimum does not replace a visual check. If the code, web address or any other element cannot be read clearly, the design must be enlarged or revised.

Adjustments to the web address, text and spacing

Derogation DER-STD-50-001_03 allows “fsc.org” to replace “www.fsc.org” where the shorter form improves legibility. The web address remains a mandatory element of the standard label.

Minor adjustments to text size and font weight are permitted where the printing technology or substrate makes the label hard to read. They may apply to:

  • The label title
  • The product type
  • The label text
  • The license code
  • The web address
  • Registration symbols

These adjustments resolve reproduction issues. They do not create a new graphic version, and the label must keep a recognizable, consistent appearance.

On portrait labels used on small products, the spacing between elements may also be reduced. Lines of text must not overlap, and the result must remain legible.

Mandatory and optional label elements

FSC guidance for version 3.0 identifies five mandatory elements of the standard label:

  • The FSC logo
  • The fsc.org address
  • The relevant claim or label title
  • The product type
  • The FSC license code

Depending on the option chosen, the Möbius loop and additional label text are optional.

The product type shows which material or component is certified. It should be specific and readily understood, to reduce the risk of misleading consumers. Where it is unclear which part of the item the certification covers, a clarifying statement may be needed.

The new FSC QR label

Version 3.0 introduces the FSC QR label as a stand-alone alternative to standard labels. The product type appears in the design itself. Other details are shown on an FSC landing page, including the FSC claim, license code and holder information from the FSC database.

The QR label may be used alone or alongside a standard FSC label. Other QR codes in the same design must remain visually separate from the FSC QR code and must not share a frame with it.

Approval of QR label checks:

  • Compliance with graphic requirements
  • That the code can be scanned
  • Correct selection of the FSC claim and product type
  • The figure shown with the Möbius loop, where applicable

Using the FSC logo beyond the label

Additional FSC trademarks may appear on a product when its label is visible to consumers at the point of sale. The label must be visible without opening or damaging the packaging. If the label is concealed inside the packaging, these additional references must not appear on the product.

Where an additional logo is applied directly to the product and the main label is on the packaging, the license code must accompany it.

Trademark approval during the transition

The intended use of FSC trademarks must be approved before it is applied. Some uses are exempt, such as certain internal documents and reprints of previously approved artwork.

During the transition to FSC-STD-50-001 V3-0, artwork that will remain in production must be adapted to the new version and approved again. Products and materials already manufactured may be used until stocks are exhausted.

DER-STD-50-001_03 and DER-STD-50-001_04 apply generically. Each specific trademark use still needs approval under the applicable approval system.

What to review now

Manufacturers and packaging teams should:

  • Confirm whether the standard or QR label is the right option for the product
  • Check legibility on the actual substrate and printing technology, especially at smaller sizes
  • Make sure the product type clearly identifies the certified material or component
  • Use “fsc.org” where the shorter address improves legibility
  • Keep other QR codes separate, avoiding layouts that suggest a visual association
  • Arrange trademark approval before producing new or updated artwork

View the full list of our forestry accreditations and licenses.

For more on the FSC trademark use system, visit the FSC website.

For further information, please contact:

Esther Martinez
FSC Coordinator
Business Assurance
t: +34 91 3138115

About SGS

SGS is the world’s leading Testing, Inspection and Certification company. We operate a network of over 2,500 laboratories and business facilities across 115 countries, supported by a team of over 100,000 dedicated professionals. With more than 145 years of service excellence, we combine the precision and accuracy that define Swiss companies to help organizations achieve the highest standards of quality, compliance and sustainability.

Our brand promise – when you need to be sure – underscores our commitment to trust, integrity and reliability, enabling businesses to thrive with confidence. We proudly deliver our expert services through the SGS name and a portfolio of trusted specialized brands, including Applied Technical Services, Brightsight, Bluesign and Nutrasource.

SGS is publicly traded on the SIX Swiss Exchange under the ticker symbol SGSN (ISIN CH1256740924, Reuters SGSN.S, Bloomberg SGSN SW).

News & Insights

  • SGS - Austria - Vienna

Grünbergstraße 15,

1120,

Vienna, Austria