Contact

What are you looking for?

Thailand Mandates New Standard for Feeding Bottle Nipples

SafeGuardSToys and Juvenile ProductsJuly 27, 2021

Thailand mandates TIS 969-2562 (2019) as the new standard for rubber nipples for feeding bottles. This standard will become effective on December 13, 2021.

In June 2021, Thailand’s Ministry of Industry issued a regulation in the Government Gazette to mandate TIS 969-2562 (2019) as the new standard for rubber nipples for feeding bottles (the Regulation). This standard specifies chemical as well as general and mechanical requirements for materials in the manufacture of these products. It was established with reference to information from manufacturers, users, and the following documents:

  • EN 14350-1:2004 Child use and care articles – Drinking equipment – Part 1: General and mechanical requirements and tests
  • EN 14350-2:2004 Child use and care articles – Drinking equipment – Part 2: Chemical requirements and test methods
  • EN 71-3:2013+A2:2017 Safety of toys – Part 3 Migration of Certain Elements
  • EN 71-11:2005 Safety of toys – Part 11: Organic chemical compounds – Method of analysis
  • EN 12868:2017 Child use and care articles – Method for determining the release of N-nitrosamines and N-nitrosatable substances from elastomer or rubber teats and soothers

In terms of chemical safety, TIS 969-2562 (2019) requires specific materials/components in rubber nipples for feeding bottles to conform to certain substances:

  • Migration of eight elements (see Table 1 below)
  • Release of N-nitrosamines and N-nitrosatable substances
  • 2-mercaptobenzothiazole release
  • Antioxidants release
  • Formaldehyde release
  • Volatile compound content 

According to the Regulation, TIS 969-2562 (2019) will become effective on December 13, 2021 – 180 days after its publication in the Government Gazette. 

Highlights of the limits for the migration of eight elements from rubber nipples for feeding bottles in the new mandatory standard are summarized in Table 1.

SG 10121 Table_Final

Table 1

SGS offers a range of consulting, training, product development, testing, auditing and inspection services to help you demonstrate that your products are safe, high quality, and that they comply with the strict regulations that are enforced by markets around the world. In the end, it’s only trusted because it’s tested. Contact us for more information or visit our website

For inquiries, please contact:

Hingwo Tsang
Global Information and Innovation Manager
t: (+852) 2774 7420

Rutchuporn Moungsom
Hardlines/Toys Laboratory Manager
t: +66 2 294 7485 

© SGS Group Management SA - 2021 - All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.

Stay on top of regulatory changes within your industry
Read more articles for the Consumer Goods and Retail industry
  • SGS SafeGuardS

1 Place des Alpes,

P.O. Box 2152, 1211,

Geneva, Switzerland