Skip to Menu Skip to Search Contact Us Global Websites & Languages Skip to Content

SAFEGUARDS | Toys & Juvenile Products NO. 098/15

SafeGuardS Child with toy phone

The new amendment A12 to EN 62115 is now harmonized under the EU Toy Safety Directive 2009/48/EC. The changes mainly affect electrical toys with a motor or inductor. New requirements are applicable for toys with integrated electromagnetic field source. They will come into force from 3 June 2017.

MAJOR CHANGES IN AMENDMENT A12

  • Marking and instructions: When the markings or instructions included in 7.4 are present only on the packaging, there must be a statement on the packaging to retain the packaging because it contains important information.
  • Heating and abnormal operation: Each low-power circuit is short-circuited by connecting the low-power point to the pole of the power supply from which the measurements are made. If this short circuit results in a hazardous condition, the short circuit is removed and the tests of 9.8.2 a) to f) are applied to the relevant low-power circuits.
  • Construction: The content of the former note Z1 (see below) is incorporated in clause 14.10 as part of the requirement. “Connectors (jack plugs, USB plugs, RCA phono plugs etc.) with a diameter or diagonal measurement between 3.75 mm and 5.25 mm and length greater than 7 mm are considered to fail this requirement.”
  • Toys with an integrated field source: Toys with an integrated field source generating Electromagnetic Fields (EMF) shall comply with EN 62233:2008 with the following modifications: Toys without a motor, inductor or which only include passive electronic components, are considered to comply with this requirement without measurement. The requirements do not apply to parts of toys consuming a current of 3 A or less. In EN 62233:2008, A.2.3 "Measuring distances and sensor location", add the following to Table A.1, before the row for "transformers for toys":

Table 1

Toys or parts of toys, intended to be used close to the body

0

All surfaces

Continuously

0.18

Toys or parts of toys, hand-held

15

All surfaces

Continuously

0.18

Toys or parts of toys, other

30

All surfaces

Continuously

0.18

SGS offers a wide range of services to ensure that your products comply with the EU Toy Safety Directive. We offer training, safety/risk assessment, technical documentation check, labelling review, testing according to harmonised standards, SVHC screening, inspections and audits. With the largest global network of toy experts and testing facilities around the world - around 20 toy labs worldwide including 4 EU Notified Bodies (France, UK, Germany and Netherlands), SGS is the partner to trust. Please do not hesitate to contact us for further information or visit our website.

For enquiries, please contact:

Milon Serge
SGS Senior Toy Expert
t: +33 4426 16450

© SGS Group Management SA – 2015– All rights reserved - SGS is a registered trademark of SGS Group Management SA. This is a publication of SGS, except for 3rd parties’ contents submitted or licensed for use by SGS. SGS neither endorses nor disapproves said 3rd parties contents. This publication is intended to provide technical information and shall not be considered an exhaustive treatment of any subject treated. It is strictly educational and does not replace any legal requirements or applicable regulations. It is not intended to constitute consulting or professional advice. The information contained herein is provided “as is” and SGS does not warrant that it will be error-free or will meet any particular criteria of performance or quality. Do not quote or refer any information herein without SGS’s prior written consent.